Lut 2.0 TPS/
Triple Probe Scanner

The Lut 2.0 TPS probe for 3-roll stand mills

The Lut 2.0 Triple Probe Scanner is ideal for:

  • Sizing and stretch-reducing mills
  • PQF®, FQM™ and any other 3-roll stand retained mandrel mills

Designed specifically for 3-roll stand mills, the Lut 2.0 TPS unit provides all the data required to adjust critical rolling parameters.

Triple probe scanning and positioning device

  • High spatial resolution provides the best cross-sectional profile possible 
  • Scanning unit completes an entire cross-sectional profile in under two seconds
  • Three measurement probes positioned 120° apart are aligned with the main rolling axis
  • Small footprint: as little as 1400 mm x 3000 mm of floor space is required
  • No tube guiding required
  • Built to sustain direct tube impact 
  • Integrated turnkey equipment with all support systems included.

Key hardware advantages

  • Marathon™ laser, with a diode lifetime of 6 billion shots, does not require regular maintenance
  • Durabeam™ fully sealed optical assembly for years of maintenance-free operations
  • PDL™ provides a wide working margin (>350mm) so the Lut 2.0 can operate at a safe distance from the tube
  • TWM™ high-sensitivity detector is naturally immune to ambient vibrations.
Learn more

Intuitive user interfaces

The Lut 2.0 thickness gauge continuously monitors tube production to attain better mill yield. Through the user interface, operators have access to all critical information in real time. Any archived data can be recalled and visualized at any time. The customizable user interface allows the user to visualize:

  • Tube profiles
  • Radial cross-section
  • Average values 
  • Production trends

The Lut 2.0 advanced analytics module:

  • Detects and quantifies eccentricity orders individually
  • Measures the position of heavy/light ends
Learn more

Maintenance plan

Predictability is key to managing the operational costs of a seamless line. Our service plan gives plant managers the peace of mind of knowing that they’ll never incur unexpected repair costs.

  • Flat-rate, all inclusive, 5-year plan
  • Insures > 98% industrial availability
Our commitment

Available options

Technical specifications - Lut 2.0 TPS


Wall thickness measurement


3 to 50 mm

0.1 to 2.0 in.


± 0.1 mm for nominal thickness under 20 mm

± 0.004 in. for nominal thickness under 0.8 in.

± 0.2 mm for nominal thickness from 20 to 25 mm

± 0.008 in. for nominal thickness from 0.8 to 1 in.

± 0.4 mm for nominal thickness over 25 mm

± 0.016 in. for nominal thickness over 1 in.


Better than 0.01 mm

Better than 0.0004 in.

Steel grades

Any steel alloys, including stainless

Any steel alloys, including stainless

Tube outer diameter


25 mm to 570 mm

1 in. to 22 in.

Temperature measurement


600°C to 1200°C

1100°F to 2200°F


± 50°C

± 120°F

Data acquisition


Up to 300 data samples/sec.

Up to 300 data samples/sec.


2 sec. for complete cross-section

2 sec. for complete cross-section

Ready to increase plant yield by 5%

Contact us to learn how to leverage the data from the Lut 2.0 and get a return on your investment in less than 2 years.